TBS Unify Pro32 Nano 5G8 V1.1 complete kit
TBS Unify Pro32 Nano uFL antenna connector
TBS Unify Pro32 Nano PCB top view

TBS Unify Pro32 Nano 5G8 V1.1

₹3,499

9 products sold in last 5 hours
Selling fast! Over 11 people have in their cart

Ultra-light 1g nano FPV video transmitter with up to 500mW power, SmartAudio V2.1, CRSF support, PitMode, CleanSwitch and barcode channel configuration.

30 people are viewing this right now
  • Check Mark Estimated Delivery : Up to 4 business days
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
  • Apple Pay
Guaranteed Safe And Secure Checkout

TBS Unify Pro32 Nano 5G8 V1.1 – Advanced Nano FPV Transmission System

The TBS Unify Pro32 Nano 5G8 V1.1 represents a high-performance nano FPV video transmitter engineered for competitive racing and lightweight drone builds. Designed with efficiency and durability in mind, this ultra-compact VTX delivers strong transmission output while maintaining minimal weight. At only 1 gram, it is optimized for modern micro and racing multirotors where every gram directly impacts agility and flight dynamics.

TBS Unify Pro32 Nano 5G8 V1.1 Transmission Performance & Power Control

This nano VTX supports selectable output levels up to 500mW+, allowing pilots to adapt transmission range according to flying conditions. Whether operating at 25mW for race compliance or increasing power for extended freestyle flights, flexibility remains a core advantage. The RF amplifier design ensures stable performance while minimizing signal distortion.

SmartAudio V2.1 & CRSF Integration

The TBS Unify Pro32 Nano 5G8 V1.1 features SmartAudio V2.1 and CRSF compatibility, enabling full control through the flight controller or compatible radio systems. Pilots can adjust channel, band, and power directly from their OSD or transmitter. This eliminates manual button adjustments and streamlines race preparation. For pilots seeking a higher-output solution with MMCX connection, you may also explore the TBS Unify Pro32 DP (MMCX).

PitMode & CleanSwitch Technology

Race environments demand zero interference. PitMode reduces transmission power to an ultra-low level, allowing pilots to power up and test quads without disturbing others. CleanSwitch technology prevents signal sweep interference during startup and channel changes, ensuring neighboring pilots remain unaffected. These features make the VTX race-organizer friendly and competition ready.

Barcode Channel Configuration

An innovative feature of the Pro32 Nano is barcode channel selection. The VTX can read channel configuration barcodes directly from camera input, allowing rapid frequency setup without active transmission. This system improves safety in crowded race pits and reduces frequency conflicts.

Installation & Build Efficiency

With dimensions of just 15 x 13 x 2mm, the nano board fits easily into tight frames. The included silicone pre-tinned cable simplifies soldering, while the u.FL antenna connector supports lightweight antenna configurations. Builders looking for a high-voltage compatible racing variant can also consider the TBS Unify Pro HV 5G8 – Race (SMA) for larger builds.

Technical Specifications of TBS Unify Pro32 Nano 5G8 V1.1

  • Operating Voltage: 3–13V
  • Weight: 1g
  • Dimensions: 15 x 13 x 2mm
  • Output Power: 25mW / 100mW / 400mW / 500mW+
  • Video Format: NTSC / PAL
  • Antenna Connector: u.FL
  • Video Input Impedance: 75 Ohm

For a deeper technical explanation of 5.8GHz FPV transmission standards, refer to FPV Drone Technology Overview.
The TBS Unify Pro32 Nano 5G8 V1.1 combines compact engineering, advanced RF management, and race-ready functionality into a future-proof nano transmission system suitable for professional and competitive FPV pilots.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products