FPV Tools Kit and Materials for Building Drones and Fixed Wings
FPV Tools kit
FPV Tools kit is required to setup a lab. So, you’ve decided to take the plunge? You’re done watching from the sidelines, and you’re ready to build your own gravity-defying machine. Whether it’s a screaming fast FPV quad or a majestic Fixed Wing glider, there is nothing quite like the rush of seeing something you built with your own hands take to the skies. 🚀
But before you can touch the clouds, you need to get your hands dirty. And for that, you need the right tools!
We’ve curated the ultimate checklist for every drone builder, from the “must-haves” to the “life-savers,” all available at Mall of Aviation. Let’s dive in!
🧰 What is an FPV Tool kit?
Think of an FPV Tools kit as your portable pit crew. When you’re out in the field and you crash (and trust us, you will crash—it’s part of the fun!), this kit is what stands between you packing up early or getting back in the air. It’s a collection of essential drivers, cutters, and soldering gear that travels with you. You don’t buy a “perfect” toolkit; you build one that fits your style.
🛠️ Essential Tools: The “Can’t-Live-Without” List
You literally cannot build a drone without these. If you’re just starting, grab these first!
-
Soldering Tools: This is where the magic happens. A good soldering iron and a Heat-Resistant Soldering Mat are non-negotiable for connecting your motors and flight controllers without burning a hole in your table!
-
Hex Screwdriver Set: Most drones are held together by hex screws (usually M2 and M3). A quality set from the Hand Tools Section will save you from stripped screws and headaches.
-
Wire Cutters & Pliers: For snipping those motor wires to the perfect length.
-
Prop Nut Tools: Because tightening props by hand is a recipe for a mid-air detachment!
-
Multimeter: Your best friend for diagnosing electrical gremlins.
-
Smoke Stopper: A lifesaver! It stops your electronics from frying if there’s a short circuit when you first plug in.
-
LiPo Voltage Checker: Never fly a dead battery again.
-
LiPo Safe Bags & Bat-Safe Box: Safety first! Always store your volatile batteries in these fire-resistant containers.
🌟 Nice-to-Have Tools: Level Up Your Lab
Once you’re addicted (and you will be), these tools make life so much easier.
-
Electric Screwdriver: wrist-saver for those long build nights.
-
Bench Power Supply: For testing components safely on your desk.
-
3D Printer: Print your own mounts, protectors, and accessories!
-
Digital Calliper & Scale: For the precision engineers who care about every gram.
-
Soldering Fume Extractor: Keep your lungs happy while you solder.
-
ToolkitRC MC8: A fantastic multi-functional checker and signal generator.
✈️ Tools for FPV Fixed Wings
Building a plane? You’ll need a few specialized FPV Tools kit to get that foam into shape.
-
Hobby Knife / Utility Knife: For carving and shaping foam.
-
Servo Tester: Center your servos before you glue them in!
-
Laminating Iron: For applying that sleek covering film.
-
Weight for CG: getting the Center of Gravity right is the difference between flying and falling.
-
Fibre Tape & Vinyl Tape: Essential for strengthening foam wings.
🩹 Tapes & Glues: The Unsung Heroes
Sometimes, the only thing holding a drone together after a crash is hope… and a lot of tape.
-
Tapes: From Electrical Tape for insulating wires to Kapton Tape for high-heat areas, and Double-sided Tape for mounting receivers.
-
Glues: Hot Glue for quick fixes, E6000 for serious bonds, and UHU Por for foam-safe construction.
🧱 Materials and Supply
Don’t get stuck halfway through a build because you missed the small stuff!
-
Zip Ties: The duct tape of the drone world. You can never have enough.
-
Silicone Electrical Wires: Flexible and heat resistant.
-
Heat-shrink Tubes: To keep those solder joints safe and looking pro.
-
Battery Straps: Ejecting a battery in a crash is a nightmare—strap it down tight!
-
Silicone Conformal Coating: Waterproof your electronics if you plan to fly in the mist or snow.
-
Isopropyl Alcohol: For cleaning up flux and making your boards shine.
https://mallofaviation.com/product/techdelivers-soldering-wire-kit-for-drones/https://mallofaviation.com/product/brass-tip-cleaner-soldering-maintenance/https://mallofaviation.com/product/dmegc-18650-li-ion-battery/
Ready to start your build? Head over to Mall of Aviation to fill up your cart with everything you need. Whether you are hunting for the perfect Carbon Fiber Frame or just need some fresh Propellers, they’ve got you covered.
Happy building, and fly safe! 🚁✨