Sennheiser HMEC 26-2-1-BV-K-2

Sennheiser HMEC 26-2-1-BV-K-2

68,300.00 Rs

Description

Sennheiser HMEC 26-2-1-BV-K-2

Overview

The Sennheiser HMEC 26-2-1-BV-K-2 is a lightweight closed and supra-aural aviation headset with Active Noise Reduction NoiseGard™ professional. It is designed for use in commercial jets. The variant HMEC 26-2-T features in addition the Talk-Through-Function. Direct communication to the Flight Attendant is possible by pressing the button on the headset. The headset can still be worn. A LED indicates if Talk-Through-Mode is active. The important frequency range for speech transmission will be transmitted via the Talk-Through-Microphones. NoiseGard™ will still protect from ambient noise while the feature Talk-Through is active.

Features

  • Lightweight
  • Extremely comfortable to wear, even for extended listening, due to the two-piece automatic headband and soft ear pads
  • Active Noise Reduction NoiseGard™
  • Talk-Through-Function with HMEC 26-2-T
  • Peak Level-Protection – safeguards you from volume peaks above 110 dB
  • “Flip-away” headphone allows single-sided listening
  • Flexible microphone boom, can be worn on either left of right-hand side
  • Noise-compensating condenser microphone ensures excellent speech intelligibility
  • single-sided cable routing
  • Volume control for each channel (depending on model)
  • ETSO-approval C139
  • Made in Germany
  • 5 year warranty

Technical Data

Headphones

Impedance 600 Ohm mono / 1.200 Ohm stereo (termination)
Frequency response 20 – 14.000 Hz
Characteristic SPL 92 dB SPL at 1 kHz, 1mW, mono: HMEC 26-2
98 dB SPL bei 1 kHz, 1mW, mono: with cable-xx-2
95 dB SPL at 1 kHz, 1V: HMEC 26-2
100 dB SPL at 1 kHz, 1V with cable-xx-2
THD, total harmonic distortion <1% : at 1 kHz, 95 dB SPL
Contact pressure approx. 3.9 II
Ear coupling supra-aural
Attenuation 15 – 30 dB
Max. Sound pressure level (active) 120 dB at 1 kHz
Noise compensation (active) >18 dB at (100-300 Hz)
Transducer principle (headphones) dynamic, closed

Microphone

Impedance 150 – 2.200 Ohm (termination)
Transducer principle (Microphone) pre-polarised condenser microphone, noise-compensating
Frequency response 100 – 6.000 Hz
Output voltage 80 mV/Pa -2dB = 800 mV -2 dB : at 114 dB SPL: HMEC 26-2
60 mV/Pa +1 dB = 600 mV +1 dB at 114 dB SPL: HMEC 26-2-1, HMEC 26-2-T
Operating voltage (stand alone) 8 – 16 VDC

General data

Cable length 1.70 m / 5.6 ft.
Storage temperature 55°C… +70°C
Operating temperature -15°C… +55°C
Operating time 60 h
Power supply 2x 1,5 V Battery or 2x 1,2 V Accu
NoiseGard™ via board power: 12 – 35 VDC, max. 35 mA
Speaker type BKE 46: HMEC 26-1
BKE 46-1: HMEC 26-2-1, HMEC 26-2-T
Weight w/o cable approx. 210 g / 7.4oz
Shipping within 20-25 days.

Additional information

Weight 1 kg

Reviews

There are no reviews yet.

Be the first to review “Sennheiser HMEC 26-2-1-BV-K-2”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…